recommendation for building boulders on our walls.
As everybody is allowed to build routes, and encourage to do
so, there needs to be some rules to keep the walls looking inviting, instead of
chaos and confusement.
If you are interested in tips and guide line for building.
You can join the “build a boulder” days. Where we spend a day building, testing
and commenting about building boulders.
Rules for building
Problemsneeds to use the same color holds.
Unless you are building a route out of holds
already on the wall.
All holds needs to be marked with tape.
The tape color indicate the difficulty of the
The starting holds needs to have the full name
of the route, with underline of the markings for the rest of the holds.
The start and end needs to be marked with two
dots, unless it is a top out. Then “Top Out” needs to be clearly written on the
last holds before the top out.
The starting holds should have your initials on
it, so people knows how build the problem.
When you are done with your problem, write it up
on the right whiteboard.
There is a whiteboard for each section.
Problems that will be
Taken an existing problems and “elimination”
Elimination holds are part of challenging
yourself, and it is highly recommended, but plastering the wall with extra tape
add noise and confusement.
Routes that use existing routes as a base for
the new route.
If you add something to the end and/or start of
an already existing problem.
Campus problems/challenged problems:
Problems that demand that you read an essay before
starting, with rules and limitation for how to climb the routes.
Removing volumes and section of the walls from
your problem is okay, but try to avoid it.
Routes build from scratch with different color
We might just change the holds out with
different holds to stick to the same color, keeping the beta and spirit of the
Climbing at DTU climbing is on your own risk.
But we do not want to encourage people getting hurt, by marking high risk
This includes boulders jumping to and from the
Problems that will be
All changed will try to be carried out with as little disruption to your problems
Holds changed/moved due to being in the way of
already existing problems.
The problems that are on the wall have
priorities, if you cannot get your problem to fit, wait for the next time that there
is section cleaning.
If the backside of holds are sticking out from
the surface, they are on.
The back side of the holds are often sharp, and
people can be caught on them.
Using the wrong color or series.
This is done to make the route look nice and
easier to climb.
Try to use already exiting holds on the wall as
much as possible, to avoid making a chaotic looking wall.
All holds needs a mark to show that they are
part of the same route.
If you are marking left, right, and numbers, remember
to put arrows in pointing towards the next hold.
Feet can be marked.
This is done by putting a white piece of tape
next to the feet.
White routes are not allowed to be built within
a section cleaning
White routes takes up a lot of space, leaving
little to nothing left for building boulders problems.
Max 2 numbers of white routes per wall section.
If your white-route overlaps another make sure
that it is easy to spot the difference.
Avoid the same numbered on the hold close to each
The boarded wishes you happy boulder building.
If you have any questions or comments to anything above,
either find a board member or write to us at firstname.lastname@example.org and we will be happy
to answer any questions you might have.
If you are building a lot, and want access to the power
tools, talk with Charlie.